1. Getting acquainted with your High Pressure Cleaner
H-110-200E V00 Page 7
7) Chemical Tank (Capacity : 5L)
Fill the Chemical tank with desired type of chemical,
suitable for the cleaning task.
8) High Pressure Male Outlet
Connect to high pressure hose
9) Low Pressure Female Inlet
Connect to water supply
The machine would operate only as a cold-water high pressure cleaner if only the on/off
switch was depressed. By pressing the boiler switch, the boiler would be turned on and the
machine would function as a hot water cleaner. Temperature of the water could be achieved
by turning the temperature control knob.