EasyManua.ls Logo

Den-Sin C-110E - User Manual

Den-Sin C-110E
39 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER GUIDE & SPARE PARTS MANUAL
C-110-150-170-200E
ELECTRICAL POWERED
HEAVY DUTY COLD WATER
HIGH PRESSURE CLEANER
www.densin.com

Table of Contents

Questions and Answers

  • R
    Rachel BennettAug 2, 2025
    How to change the pump oil in a Den-Sin C-110E?
    • G
      gloverbrandonAug 2, 2025
      To change the pump oil in your Den-Sin Pressure Washer: 1. Turn off the High Pressure Cleaner. 2. Loosen the bolt (Hex) at the bottom of the pump housing. 3. Drain the oil into a waste oil-tray. 4. Tighten the bolt (Hex). 5. Add oil through the pump inlet on top of the pump until the red point of the oil control glass has been reached. Use SAE 15W40 oil, approximately 0.4kg. Do not dispose of used oil in the drain.
  • P
    Pamela MunozAug 15, 2025
    How to clean the motor fan on a Den-Sin C-110E Pressure Washer?
    • C
      Charles WhiteAug 16, 2025
      To clean the motor fan on your Den-Sin Pressure Washer to ensure sufficient airflow: * Clean the motor fan cover. * Clean the motor fan blade. Do NOT operate the machine with a damaged or removed fan cover.

Summary

Safety

Getting Acquainted with Your High Pressure Cleaner

Specifications

Applications

Machine Installation; Setup

Step-by-step guide for assembling and setting up the high-pressure cleaner.

Machine Shut Down Procedure

Steps for safely shutting down and preparing the machine for storage.

Operations

Provides essential safety precautions and guidelines for operating the machine.

Safety and Protection Information

General Safety & Application Guidelines

General rules for safe operation and application of the cleaner.

Safety Devices

Details the built-in safety features of the high-pressure cleaner.

Safety Precautions

Specific protective measures and clothing recommendations for users.

Safety Precautions

Personal Protective Equipment

Details required protective clothing and devices for safe operation.

Maintenance and Troubleshooting

Maintenance Schedule

Schedule outlining regular maintenance tasks and intervals for the machine.

General Preventive Maintenance Guide

Lists parts and service intervals for preventive maintenance.

Machine Prevention

Troubleshooting

Common issues and their corresponding rectification steps.

Service Instructions

Procedures for servicing specific components like valves and seals.

Servicing the Valves

Detailed steps for inspecting and servicing the machine's valves.

Servicing the Packing;Seals

Procedures for removing and replacing pump packing and seals.

Servicing the Plungers

Steps for replacing piston kits, support rings, and water seals for plungers.

Pump Head to Drive End Installation

Torque Specification

Accessories and Spare Parts

Accessories

Wiring Diagram

Wiring Diagrams (Non-Auto Start Stop)

Wiring Diagrams (Auto Start Stop Single Phase)

Wiring Diagrams (Auto Start Stop 3 Phase)

Wiring Diagrams (Auto Start Stop 3 Phase 220 V)

Warranty

Den-Sin C-110E Specifications

General IconGeneral
Operating Pressure110 bar
Power2.2 kW
Voltage230V
Flow Rate8 L/min
Water Flow Rate8 L/min

Related product manuals