16
PROPER CARE OF YOUR
DENI TURBO II
Before attempting any cleaning operations, make sure that
the unit is unplugged.
To clean the lid and housing, simply wipe clean with a soft,
damp cloth. Do not immerse in water. Do not use any
abrasive cleaners.
If pieces of plastic stick to the cutting wire, wipe them off
carefully to avoid damage to the wire. It may help to carry
out a sealing operation (closing lid and pressing down
firmly) without a bag in position. This will heat the wire and
soften any plastic film adhering to it.
1830 Instructions 7/16/03 3:39 PM Page 16
To Next Page
Loading...
