4
HOW TO OPERATE THE
DENI FRESHLOCK TURBO II
VACUUM SEALER
Before Operating Your Unit
Place your FRESHLOCK Turbo II on a firm,
level, dry surface and plug it directly into a
standard 110 AC outlet. (Extension cords may
prevent the unit from working properly. If
necessary always use an extension cord with
equal or greater rating.)
Your FRESHLOCK Turbo II includes two
rolls of superior-grade polyethylene plastic.
Place one roll in the unit and put the Heat-
Selector Switch on Medium (M).
Folded end of roll
Open end of roll
White labeling strip
FIGURE 2
1830 Instructions 7/16/03 3:39 PM Page 4
To Next Page
Loading...
