Denon AVC-A1H User Manual

Playback the source in ZONE2/ZONE3
o
Playing the same source simultaneously in MAIN ZONE, ZONE2 and ZONE3 (TV Audio Sharing
setting)
The TV Audio Sharing setting of this unit can be used to output all signals from ZONE2 and ZONE3 by setting “Source” as the input source for ZONE2 and
ZONE3. When playing audio input from a TV via the ARC or eARC or audio input from a playback device, you can enjoy the original input audio format,
such as Dolby Atmos, in surround sound in MAIN ZONE while playing the same content in ZONE2 and ZONE3.
0
Only the controls on the main unit can be used to set “Source” as the input source.
ZONE3 ON/OFF ZONE3 SOURCE
ZONE2 SOURCEZONE2 ON/OFF
1
Select the input source to play back in the MAIN ZONE.
2
Press ZONE2 ON/OFF or ZONE3 ON/OFF on the main
unit to turn on the power of ZONE2 or ZONE3.
The j indicator on the display lights.
Contents
Connections Playback Settings Tips Appendix
159
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB