Denon AVC-A1H User Manual

oQ0 Q1
uyi
F
Sleep timer indicator
This lights when the sleep mode is selected. (v p. 142)
G
MUTE indicator
This blinks while the sound is muted. (v p. 86)
H
Volume indicator
I
Information display
The input source name, sound mode, setting values and other
information are displayed here.
J
Front speaker indicator
This lights according to the setting of the front A and B speakers.
K
Input/output signal channel indicators
The channel for input/output signals is displayed according to the
setting configured for “Channel Indicator”. (v p. 261)
0
When “Channel Indicator” is set to “Output” (Default)
These light when audio signals are being output from the speakers.
0
When “Channel Indicator” is set to “Input”
These light corresponding to the channels that include the input
signals.
When playing HD Audio sources, the A indicator lights when a
signal from an extension channel (a channel other than the front,
center, surround, surround back, front height, front wide or LFE
channel) is input.
Contents Connections Playback Settings Tips Appendix
23
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB