Denon AVC-A1H User Manual

Video Game
Matrix
Virtual
SDDDD
Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11
D
SDDDD
Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11
D
SDDDD
Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11
D
SDDDD
Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11
D
SDDDD
Dz11 Dz11
Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11
D
SDDDD
Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11 Dz11
D
S D
Multi Ch Stereo
Rock Arena
Jazz Club
Mono Movie
Sound mode
Channel output
Front
L/R
Center
Surround
L/R
Surround
Back
L/R
Front
Wide
L/R
Front
Height
L/R
Top
Front
L/R
Top
Middle
L/R
Top
Rear
L/R
Rear
Height
L/R
Surround
Height
L/R
Center
Height
Top
Surround
Front
Dolby Atmos
Enabled
L/R
Surround
Dolby Atmos
Enabled
L/R
Back
Dolby Atmos
Enabled
L/R
Subwoofer
z1
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z2
The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.
z3
The applicable sound mode includes “DTS Virtual:X” and sound modes that have “+Virtual:X” in the sound mode name.
z4 Audio is output when “Bass” - “Subwoofer Output” in the menu is set to “LFE + Main”. (v p. 236)
z5
A signal for each channel contained in an input signal is output as audio.
z6
Audio is not output when the “Surround Parameter” - “Speaker Virtualizer” in the menu is set to “On” and “Speaker Configuration” - “Surround Back” in the menu is set to
“1 spkr”. (v p. 173, 229)
z7 Audio is not output when the “Surround Parameter” - “Speaker Virtualizer” is set to “On”. (v p. 173)
z8
When “Speaker Configuration” - “Surround Back” is set to “2 spkrs”, “Speaker Configuration” - “Center” is set to “Large” or “Small”, and sound mode is set to “IMAX DTS”,
surround audio is output from the surround back speaker. Audio is not output from the surround speaker. (v p. 229)
z9
For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in
place of Surround Height speakers.
z10
For the best Auro-3D experience Front Height and Surround Height speakers are recommended, however you may substitute Dolby Atmos Enabled speakers.
z11 Audio is output from the speakers specified in the “Surround Parameter” - “Speaker Select” settings. (v p. 178)
Contents
Connections Playback Settings Tips Appendix
309
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB