Denon AVR-S570BT Quick Start Guide

How to attach the cable labels
The supplied cable labels include labels for the speaker and
HDMI cables.
Attach a cable label to each cable that matches the speakers
and HDMI devices being connected, as shown below.
This makes it easy to identify and properly connect the cables
between your components .
Setup
0 Connect the power cord
Place the AVR near your TV and connect the power cord.
Power cord
u
\l
TV
O ~~ 0
0
000 0
0 0
00 00
e,
AVR
FR
ES
PT
4

Denon AVR-S570BT Specifications

General

Channels	5.2
Power Output	70W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Outputs	1
4K/60Hz Pass-through	Yes
Bluetooth	Yes
Dolby Vision	Yes
HDR10	Yes
HDCP 2.3 Support	Yes
HDMI 2.1	No
4K/120Hz pass-through	No
HDR Support	Yes
eARC	Yes
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus
DTS Technologies	DTS-HD Master Audio
Frequency Response	10Hz-100kHz
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	98dB
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV
Input Sensitivity/Impedance	200 mV / 47 kΩ
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg