AVR-S700W (1 of 3)
1
Procedure to enter the “Protection History Display Mode”.
1. Hold down buttons “TUNER PRESET CH-”, “ TUNE-” and “TUNER PRESET CH+” at the same time and press the power button to turn on the power.
2. Select "PROTECTION" using the “TUNER PRESET CH+/-“ button, and press the “STATUS" button.
3. Press the "STATUS" button again and the unit will display the Protection History condition.
TUNER PRESET CH+TUNER PRESET CH-
TUNE-
POWER
PROTECTION HISTORY DISPLAY MODE
CLEARING THE PROTECTION HISTORY
MODEL INFO. INDEX
Protection History Mode records and displays an event in which the THERMAL, CURRENT, ASO or DC protection was activated.
MODEL INFO. INDEX
To Next Page
