EasyManuals Logo

Denon AVR-S700W Instructions

Denon AVR-S700W
3 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Press and hold the “DIMMER" button for 3 seconds.
Press and hold the “DIMMER“ button again for 3 seconds and
“CLEAR” is displayed followed by “NO PROTECT”. The units
Protection History is now cleared.
Clearing the Protection History
If the unit is in “Protection History Display Mode”, just press and hold the “ENTER” button for 3 seconds. Note: If you do not mind erasing your settings from this unit, you can
also “Initialized/Micro Reset the unit to clear the Protection History from the units memory.
If the unit is not in “Protection History Display Mode”, enter the “Protection History Display Mode”:
1. Hold down buttonsTUNER PRESET CH-”, TUNE-” and “TUNER PRESET CH+” at the same time and press the “POWER” button to turn on the power.
2. Select "PROTECTION" using the “TUNER PRESET CH+/-buttons, and press the “STATUS" button.
3. Press the "STATUS" button again and the unit will display the Protection History condition.
FLD
P R T : D C
FLD
P R T : C L E A R
FLD
N O P R O T E C T
Warning Displays by POWER LED
If the power is turned off while a protection is detected, the POWER LED (red) flashes in the following ways as a warning according to the protection status.
(a) ASO/DC protection: Flashes in 0.5-second cycles (0.25 seconds lit, 0.25 seconds unlit)
(b) THERMAL (A/B) protection: Flashes in 2-second cycles (1 seconds lit, 1 seconds unlit)
AVR-S700W (3 of 3)
PROTECTION HISTORY DISPLAY MODE
FRONT PANEL _ BUTTONS LOCATION
MODEL INFO. INDEX
MODEL INFO. INDEX

Other manuals for Denon AVR-S700W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S700W and is the answer not in the manual?

Denon AVR-S700W Specifications

General IconGeneral
Channels7.2
Power Output per Channel75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response10 Hz - 100 kHz
Total Harmonic Distortion0.08%
Signal-To-Noise Ratio98 dB
Input Impedance47 kOhms
Input Sensitivity200 mV
HDMI Inputs6
HDMI Outputs1
Composite Inputs2
Component Inputs2
Analog Inputs4
Composite Output1
Component Output1
Wi-FiYes
BluetoothYes
AirPlayYes
DLNAYes
HDMI Pass-ThroughYes
HDMI SwitchingYes
3D TechnologyYes
Digital Inputs2 Optical
Supported Audio FormatsDTS-HD Master Audio, Dolby TrueHD
Supported Video Formats4K, 3D
Additional FeaturesAudyssey MultEQ
Tuner Presets56
Dimensions17.1 x 13.3 x 6.6 inches

Related product manuals