Denon AVR-S710W Quick Start Guide

6
2.4) Turn on the TV.
TV remote control unit
2.5) Select the appropriate HDMI input
on your TV.
HDMI
TV/
VIDEO
INPUT
or
TV remote control unit
2.3) Connect the receiver to your TV
with an HDMI cable.
FRONT FRONT CENTER SURROUND
SURROUND BACK SURROUND BACK SURROUND
HDMI IN
(ARC)
HDMI OUT
MONITOR
(ARC)
ARC
MONITOR
HDMI cable
Receiver (Rear panel)
ARC (Audio Return Channel) :
If your TV supports ARC, your TV can send audio back to the AV receiver
when you are using your TV’s built-in video sources (TV tuner, Smart TV
streaming services, etc…) ARC requires that you enable HDMI CEC on
your TV. Please refer to your TV’s Owner’s Manual for instructions on how
to setup HDMI CEC. Note that some TV manufacturers use other names
for the HDMI CEC function.
1. AVR-S710WE3_QSG_ENG_150311.indd 6 2015/03/13 10:55:22

Denon AVR-S710W Specifications

General

Channels	7.2
HDMI Inputs	6
HDMI Outputs	1
Dolby Atmos	Yes
DTS:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Audyssey MultEQ	Yes
3D Pass-Through	Yes
AirPlay	Yes
Spotify Connect	Yes
Dimensions	17.1 x 13.3 x 6.6 inches
Power Output	75W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)