Description “V1-02”: Cannot detect the HDMI signal from the source device at
the AVR input terminal (as TMDS Rx PLL UnLock).
Description “V1-06”: Copyright Protection certification Error with Source
Device. (HDCP Error).
Description “V1-10”: Quality of HDMI Signal(TMDS) is bad.
Note 1 : Source Device check item (For details (v p. 40))
Note 2 : AV Receiver check item (For details (v p. 40))
Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting
24
To Next Page
Loading...
