EasyManuals Logo

Denon AVR-S960H User Manual

Denon AVR-S960H
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
Restorer
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “Restorer”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
o
Mode
High:
Optimized mode for compressed sources
with very weak highs (64 kbps and
under).
Medium:
Apply suitable bass and treble boost for
all compressed sources (96 kbps and
under).
Low:
Optimized mode for compressed sources
with normal highs (96 kbps and over).
Off: Do not use “Restorer”.
0
This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
0
This item default setting for “HEOS Music” is “Low”. All others are set to “Off”.
0
This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0
“Restorer” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix
154
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S960H and is the answer not in the manual?

Denon AVR-S960H Specifications

General IconGeneral
DisplayVFL
HDCP version2.3
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS:X
Volume controlRotary
Receiver typestereo
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)145 W
Power output per channel (20-20KHz@8 Ohm)95 W
Connectivity technologyWired & Wireless
Speakers connectivity typeRCA
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)460 W
Package weight11500 g
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
HDMI in7
Audio (L/R) in4
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
3D-
Package depth429 mm
Package width520 mm
Package height243 mm
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width434 mm
Height167 mm
Weight9500 g

Related product manuals