Listening to FM/AM broadcasts
1
Connect the antenna. (“Connecting an FM/AM
antenna” (v p. 33))
2
Use FM or AM to switch the input source to “FM” or
“AM”.
G TV screen H
.
3
Press MODE to select the tune mode, then press
ENTER.
AUTO
(Default) :
Automatically search for and tune to a
receivable radio station.
MANUAL:
Manually change the frequency one
step at a time each time the button is
pressed.
4
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
In “AUTO” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “MANUAL” mode to tune in.
Operation buttons Function
MEMORY Register presets
MODE Switching tune mode
TUNE +, - Selects the radio station (up/down)
CHANNEL +, - Selects preset radio stations
Contents Connections Playback Settings Tips Appendix
46
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
