To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-X510BT and is the answer not in the manual?
General| Channels | 5.2 |
|---|---|
| Power Output (8 ohms) | 70 W |
| Power Output (6 ohms) | 90 W |
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| HDMI Inputs | 5 |
| HDMI Outputs | 1 |
| Bluetooth | Yes |
| Weight | 7.2 kg |
| Signal-To-Noise Ratio | 98 dB |
| 3D Technology | Yes |
| HDMI Pass-Through | Yes |
| Digital Optical Inputs | 2 |
| Digital Coaxial Inputs | 1 |
| Analog Inputs | 4 |
| Subwoofer Outputs | 1 |
| Composite Video Outputs | 1 |
| Wi-Fi | No |
| Dimensions | 434 x 151 x 319 mm |
| Input Impedance | 47 kOhms |
| Tuner Type | FM |
| Tuner Bands | AM, FM |
Highlights parts with special safety properties, indicated by the 'z' mark.
Parts marked with 'z' have critical characteristics; use only manufacturer-recommended parts.
'nsp' parts cannot be supplied; distinguish '1' and 'I' when ordering.
Wear a grounding band (1 MΩ) for static electricity removal.
Use a conductive sheet or copper plate with grounding (1 MΩ).
Details rated output, input sensitivity, frequency response, S/N, and tuner specs.
Details communication system, transmission power, range, and supported profiles.
Details power supply, power consumption in various modes.
Details rated output, input sensitivity, frequency response, S/N, and tuner specs.
Details communication system, transmission power, range, and supported profiles.
Details power supply, power consumption in various modes.
Procedure to initialize the unit after replacing microcomputer or digital PCB.
Details disassembly procedure and references for Front Panel Assy.
Details disassembly procedure and references for Digital PCB Assy.
Details disassembly procedure and references for Radiator Assy.
Details disassembly procedure and references for SMPS PCB.
Details disassembly procedure and references for Regulator PCB.
Details disassembly procedure and references for Trans Power.
Instructions for removing screws and disconnecting FFC cables.
Instructions for disconnecting connector wires.
Instructions for removing screws and disconnecting wires/FFC.
Instructions for removing screws and disconnecting connector wire.
Instructions for removing the Radiator Assy from the chassis bottom.
Performs backup data initialization. Refer to page 11.
Displays firmware versions and errors. Refer to page 20.
Switches between Video Format (NTSC/PAL) and Display Language.
Selects modes like Remote Lock, Tuning Step Change, OSD Update.
Details the procedure for adjusting idling current with a DC voltmeter.
Indicates audio output channels and parameters for various sound modes.
Details selectable surround modes and their adjustable parameters.
Troubleshooting flowchart for 'unit does not power on' and 'fuse is blown' conditions.
Troubleshooting steps for analog video output issues, checking voltage and ICs.
Troubleshooting flowchart for HDMI/DVI connection and compatibility issues.
Illustrations of test points and waveforms for HDMI troubleshooting.
Flowchart for checking audio output through various inputs and blocks.
Troubleshooting steps for no sound output, checking transistors and resistances.
Troubleshooting steps for Bluetooth device recognition, checking connections and voltages.
Troubleshooting flowchart for SMPS DC 5V output failure, checking fuse, IC, and shorts.
Shows voltage distribution and current consumption for various circuits.
Illustrates signal levels and gains for the front channel audio path.
Illustrates signal levels and gains for the center channel audio path.
Illustrates signal levels and gains for the surround channel audio path.
Illustrates signal levels and gains for the subwoofer channel audio path.
Component layout on the front PCB (A and B sides).
Component layout on the main PCB (A and B sides).
Component layout on the digital PCB (A and B sides).
Component layout on the SMPS PCB (A and B sides).
Component layout on the regulator PCB (A and B sides).
Component layout on the tuner PCB (A and B sides).
Component layout on the standby PCB (A and B sides).
Component layout on the phone PCB (A and B sides).
Component layout on the video PCB (A and B sides).
Component layout on the USB & MIC PCB (A and B sides).
Schematic diagram for the MCU (Microcontroller Unit) part.
Schematic diagram for the HDMI On-Screen Display part.
Schematic diagram for the HDMI 4K signal processing part.
Schematic diagram for the Digital Signal Processor (DSP) part.
Schematic diagram for the digital power supply circuits.
Schematic diagram for the input selection and volume control circuitry.
Schematic diagram for the USB, Bluetooth, and Setup Mic circuitry.
Schematic diagram for video input and optical audio input circuitry.
Schematic diagram for the main audio amplifier and power supply sections.
Schematic diagram for the front panel controls and indicators.
Schematic diagram for the voltage regulator circuits.
Schematic diagram for the Switching Mode Power Supply (SMPS).
Lists major semiconductors, including MCU, ADV7623, CS497024, etc.
High-voltage MOSFET drain pin, internal start-up bias current source.
Error amplifier and feedback input for duty cycle control.
Input for external current limit adjustment and remote ON/OFF.
Combines V, X pin functions: OV, UV, line feed, OVP, external current limit.
Selects switching frequency (132 kHz or 66 kHz) if connected to SOURCE or CONTROL.
Return for C pin capacitor and X pin resistor.
MOSFET source connection for high voltage power return.
Shows pin assignments and connections for the FL display.
Diagram illustrating the mapping of grid segments to display characters.
List of semiconductors used in the front PCB assembly.
List of resistors used in the front PCB assembly.
List of capacitors used in the front PCB assembly.
List of other components like connectors, switches, and fuses.
List of semiconductors used in the USB PCB assembly.
List of resistors used in the USB PCB assembly.
List of capacitors used in the USB PCB assembly.
List of other components like connectors, fuses, and tuners.
List of semiconductors used in the digital PCB assembly.
List of resistors used in the digital PCB assembly.
List of capacitors used in the digital PCB assembly.
List of other components like connectors, fuses, and tuners.
List of semiconductors used in the main PCB assembly.
List of resistors used in the main PCB assembly.
List of capacitors used in the main PCB assembly.
List of semiconductors used in the power PCB assembly.
List of resistors used in the power PCB assembly.
List of capacitors used in the power PCB assembly.
List of other components like connectors, fuses, and relays.
List of semiconductors used in the digital PCB assembly.
List of resistors used in the digital PCB assembly.
List of capacitors used in the digital PCB assembly.
List of other components like connectors, fuses, and tuners.
List of semiconductors used in the video PCB assembly.
List of resistors used in the video PCB assembly.
List of capacitors used in the video PCB assembly.
List of other components like connectors, fuses, and jacks.
Lists major assemblies like Front PCB, Main PCB, Digital PCB, etc.
Lists major assemblies like Front PCB, Main PCB, Digital PCB, etc.
Lists included accessories like poly bags, power cord, manual, and batteries.
Lists included accessories like poly bags, power cord, manual, and batteries.
