Denon AVR-X510BT Owner's Manual

o
Center
Set the presence and size of the center speaker.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when a center speaker is not
connected.
o
Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
Use a subwoofer.
No:
Select when a subwoofer is not
connected.
o
Surround
Set the presence and size of the surround speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround speakers are
not connected.
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o
Step
Set the unit of distance.
0.1 m / 0.01 m (Default: 0.1 m)
o
Set Defaults
The “Distances” settings are returned to the default settings.
o
Set the distance
0.00 m – 18.00 m
0
The speakers that can be selected differ depending on the “Speaker Config.”
settings. (v
p. 85)
0
Default settings:
Front L / Front R / Center / Subwoofer: 3.60 m
Surround L / Surround R: 3.00 m
0
Set the difference in the distance between the speakers to less than 6.00 m.
Contents Connections Playback Settings Tips Appendix
86
Front panel Display Rear panel Remote Index

Denon AVR-X510BT Specifications

General

Brand	Denon
Model	AVR-X510BT
Category	Stereo Receiver
Language	English