EasyManuals Logo

Denon AVR-X540BT User Manual

Denon AVR-X540BT
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your mobile device.
2
Press OPTION when the input source is “Bluetooth”.
The option menu screen is displayed.
3
Use ui to select “Pairing Mode”, then press ENTER.
The device will go into the pairing mode.
4
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
5
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
0
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0
Enter “0000” when the password is requested on the screen of the Bluetooth
device.
0
Press and hold the Bluetooth on the remote control for at least 3 seconds to go
into pairing mode.
Contents Connections Playback Settings Tips Appendix
45
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X540BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X540BT and is the answer not in the manual?

Denon AVR-X540BT Specifications

General IconGeneral
Channels5.2
HDMI Inputs5
HDMI Outputs1
BluetoothYes
4K Ultra HD Pass-throughYes
Dolby TrueHDYes
DTS-HD Master AudioYes
Auto Speaker CalibrationNo
Number of Power Amps5
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)140 W
Composite In2
Composite Out1
Digital In: Optical2
Analog In2
Speaker Terminal: ScrewYes
FM Tuner with RDSYes
3D Signal Pass-ThroughYes
Audio Return ChannelYes
HDMI Standby Pass-ThroughYes
CECYes
Auto Speaker Setup by MicrophoneNo
Dimensions (W x H x D)434 x 151 x 319 mm
Weight7.5 kg
Total Harmonic Distortion0.08 %
Input Sensitivity/Impedance200 mV / 47 kΩ
Signal-to-Noise Ratio98 dB
Ethernet PortNo
Wi-FiNo
Power Output per Channel70W (8 ohms, 20Hz - 20kHz, 0.08% THD)
Frequency Response10Hz - 100kHz
Supported Audio FormatsMP3, WMA, AAC

Related product manuals