EasyManuals Logo

Denon AVR-X540BT User Manual

Denon AVR-X540BT
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
o
Dynamic Comp.
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High: These set the compression level.
Off:
Dynamic range compression is always
off.
0
“Auto” can only be set when Dolby TrueHD signals are input.
o
Low Frequency
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default : 0 dB)
0
For proper playback of the different sources, we recommend setting to the
values below.
0
Dolby Digital sources : 0 dB
0
DTS movie sources : 0 dB
0
DTS music sources: -10 dB
o
Center Image
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0 (Default : 0.3)
0
You can set this when the sound mode is DTS Neo:6 in the “Music” mode.
0
The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
Contents Connections Playback Settings Tips Appendix
75
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X540BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X540BT and is the answer not in the manual?

Denon AVR-X540BT Specifications

General IconGeneral
Channels5.2
HDMI Inputs5
HDMI Outputs1
BluetoothYes
4K Ultra HD Pass-throughYes
Dolby TrueHDYes
DTS-HD Master AudioYes
Auto Speaker CalibrationNo
Number of Power Amps5
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)140 W
Composite In2
Composite Out1
Digital In: Optical2
Analog In2
Speaker Terminal: ScrewYes
FM Tuner with RDSYes
3D Signal Pass-ThroughYes
Audio Return ChannelYes
HDMI Standby Pass-ThroughYes
CECYes
Auto Speaker Setup by MicrophoneNo
Dimensions (W x H x D)434 x 151 x 319 mm
Weight7.5 kg
Total Harmonic Distortion0.08 %
Input Sensitivity/Impedance200 mV / 47 kΩ
Signal-to-Noise Ratio98 dB
Ethernet PortNo
Wi-FiNo
Power Output per Channel70W (8 ohms, 20Hz - 20kHz, 0.08% THD)
Frequency Response10Hz - 100kHz
Supported Audio FormatsMP3, WMA, AAC

Related product manuals