To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-X7200WA and is the answer not in the manual?
General| Channels | 9.2 |
|---|---|
| Power Output (8 ohms) | 150 W |
| HDMI Inputs | 8 |
| HDMI Outputs | 3 |
| Audio Formats Supported | Dolby Atmos, DTS:X, Auro-3D |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Multi-Room Capability | Yes |
| Signal-To-Noise Ratio | 102 dB |
| THD | 0.05 % |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Tuner Type | Digital |
| Tuner Bands | AM/FM |
| Surround System Class | 9.2 channel |
| HDMI Switching | Yes |
| 3D Technology | Yes |
| HDMI Pass-Through | Yes |
| DAC | 32-bit/192 kHz |
| Network Support | Ethernet, Wi-Fi |
| Response Bandwidth | 10Hz - 100kHz |
| Internet Streaming Services | Spotify |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | 0.05% |
| Digital Inputs | 2 Coaxial |
| Dimensions (W x H x D) | 434 x 167 x 400 mm |
Essential introductory instructions and warnings for immediate attention before proceeding with setup.
Lists all necessary components and cables required for the initial setup of the AV receiver.
Lists optional components like LAN cable and Wi-Fi router for network connectivity.
Detailed steps on how to attach and position external antennas for Bluetooth and Wi-Fi.
Instructions for correctly inserting batteries into the remote control unit.
Instructions for connecting the AV receiver to a network via wired LAN or wireless LAN.
Steps for connecting the receiver to the TV via HDMI and turning on both devices.
Guide on using the on-screen assistant for configuring speakers and components.
Instructions to access the full owner's manual via a web browser using a provided URL.
Instructions to access the print version of the manual from the included CD-ROM or PDF download.
