SETUP
uio
p
ENTER
ZONE SELECT
BACK
Menu operations
1
Press ZONE SELECT on the remote control unit to set
the operating zone to the MAIN ZONE.
The J indicator lights.
2
Press SETUP.
The menu is displayed on the TV screen.
3
Use ui p to select the menu to be set or operated,
then press ENTER.
4
Use o p to change to desired setting.
5
Press ENTER to enter the setting.
0
To return to the previous item, press BACK.
0
Exiting the menu, press SETUP while the menu is displayed. The
menu display disappears.
Contents Connections Playback Settings Tips Appendix
179
Front panel Display Rear panel Remote Index
To Next Page
Loading...
