Playing files stored on USB flash drives
1
Insert the USB flash drive into the USB port.
2
Press USB to switch the input source to “USB Music”.
0
You can also press R (HEOS Music). Use ui to select “USB
Music”, then press ENTER.
3
Select the name of this unit.
4
Browse the music on your USB flash drive and select
something to play.
0
When you select something to play you will be asked how you want to
queue up your music.
Play Now:
Inserts the item into the queue after the
currently playing track and plays the
selected item immediately.
Play Now & Replace
Queue:
Clears the queue and plays the
selected item immediately.
Play Next:
Inserts the item into the queue after the
currently playing track and plays it when
the currently playing track ends.
Add to End of Queue: Adds the item to the end of the queue.
5
Use ui to select the “Play Now” or “Play Now &
Replace Queue”, then press ENTER.
Playback starts.
Contents
Connections Playback Settings Tips Appendix
39
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
