0
When “TV Input” is set in the menu, this unit automatically turns on when the TV
connected to the unit is turned on, and the input source switches to “HDMI” or
“Optical”. (v p. 89)
NOTE
0
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise
and could damage the speakers.
o
Specifications of supported audio formats
See “Digital input” (v p. 131).
Contents Connections Playback Settings Tips Appendix
70
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
