8
1
2
No sound:
• Check all connections.
• Make sure the bare metal wire ends of the speaker wires are in contact with
the metal part of the speaker terminals.
• Check the digital audio output setting on your TV.
• Only 2-channel linear PCM can be input as the digital audio signal to the OPTICAL IN
connector of the CEOL.
Basic trouble shooting
Connect the optical cable from your TV to the “OPTICAL IN 1”
connector of the CEOL.
Turn on your TV.
Automatically the CEOL turns on and switches the input to the “Optical In 1”.
Note : To disable “Auto-Play”, go to Setup and set “Auto-Play” to “Off”.
Download the HEOS App
Enjoying sound from your TV
The HEOS App lets you control your CEOL from
anywhere in your home. Use HEOS to explore,
browse, and play music from many online
streaming services or from your own music library.
Français NederlandsDeutsch EspañolItaliano Svenska
Pусский
Polski
English
1.RCD-N10E2_ENG_QSG_180522.indd 8 2018/05/28 13:56:43
To Next Page
Loading...
