Setting the auto standby mode
When auto standby mode is set to on, if the unit remains in the stopped
state and no operations are performed for approximately 15 minutes, the
unit automatically switches to standby mode.
The default setting is on.
1
Press and hold POWER X for 5 seconds or more to
switch it on and off.
The display changes as follows each time it is switched on and off.
0
When auto standby mode is on: “Auto STBY On” is displayed.
0
When auto standby mode is off: “Auto STBY Off” is displayed.
Contents
Connections Playback Settings Tips Appendix
33
Front panel Display Rear panel Remote Index
To Next Page
Loading...
