Denon DCD-2500NE - Setting the Auto Standby mode

Setting the Auto Standby mode
When Auto Standby mode is set to On, if the unit remains in the stopped
state and no operations are performed or if there are no input signals for
approximately 30 minutes, the unit automatically switches to standby
mode.
The default setting is “On”.
.
X
Turning Auto Standby mode off
1
Press and hold X for more than 5 seconds to turn the
Auto Standby mode off.
The power indicator flashes once.
Turning Auto Standby mode on
1
Press and hold X for more than 5 seconds to turn the
auto standby mode on.
The power indicator flashes three times.
Contents Connections Playback Settings Tips Appendix
Settings
33
Front panel Display Rear panel Remote Index