Denon DCD-800NE - Setting the Auto Standby Mode; Turning Auto Standby Mode Off; Turning Auto Standby Mode On

Setting the Auto Standby mode
When Auto Standby mode is set to On, if the unit remains in the stopped
state and no operations are performed for approximately 30 minutes, the
unit automatically switches to standby mode.
Auto Standby mode is set to on by default.
.
POWER
X
Turning Auto Standby mode off
1
Press and hold POWER X for more than 5 seconds to
turn the Auto Standby mode off.
“AUTO STANDBY OFF” appears on the display.
Turning Auto Standby mode on
1
Press and hold POWER X for more than 5 seconds to
turn the Auto Standby mode on.
“AUTO STANDBY ON” appears on the display.
Contents Connections Playback Settings Tips Appendix
37
Front panel Display Rear panel Remote Index