Need help?Do you have a question about the Denon DCD-800NE and is the answer not in the manual?
General| USB 2.0 ports quantity | 1 |
|---|---|
| Frequency range | 2 - 50000 Hz |
| Audio formats supported | AAC, MP3, WMA |
| Signal-to-Noise Ratio (SNR) | 115 dB |
| Total Harmonic Distortion (THD) | 0.0015 % |
| Power source type | AC |
| AC adapter frequency | 60 Hz |
| AC adapter input voltage | 120 V |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 28 W |
| CD changer | No |
| Device type | HiFi CD player |
| Product color | Silver |
| Playback modes | Fast backward, Fast forward, Program, Random, Repeat, Stop |
| Number of decks | 1 deck(s) |
| Housing material | Aluminum |
| Channels quantity | 2 channels |
| Playback disc types | CD, CD-R, CD-RW |
Weight and Dimensions| Depth | 275 mm |
|---|---|
| Width | 434 mm |
| Height | 107 mm |
| Weight | 4500 g |
Details the disc tray, play/pause, stop, and skip buttons on the front panel.
Identifies the USB port and remote control sensor on the front.
Details the analog and digital audio output connections on the rear.
Covers IR control connectors and the power cord connection.
Explains the general purpose and operations of the included remote control.
Checks for power plug insertion and standby mode status when the unit won't turn on.
Explains auto standby mode and how to disable it.
Troubleshooting steps for remote control issues, including batteries and sensor obstructions.
Checks for display off due to DIMMER or PURE DIRECT mode.
Checks connections, cables, amplifier functions, and Pure Direct mode for sound issues.
Addresses interruptions from poor recording quality or slow USB transfer speeds.
Troubleshooting for dirty/scratched discs, finalization, and recording quality.
Explains 'NO DISC' and 'UNSUPPORTED' messages and their causes.
Details channels, frequency range, response, S/N, dynamic range, harmonic distortion, and output level for analog audio.
Details channels, frequency range, response, S/N, dynamic range, harmonic distortion, and output level for digital audio.
Details laser type, wavelength, signal type, and sampling frequency of the optical pickup.
Specifies digital output (Coaxial, Optical) and input (USB) signal levels and types.
Lists power supply, power consumption, and standby power consumption.
To Next Page
