Why won't my Denon CD Player play CD-R or CD-RW discs?
If your Denon CD Player won't play a CD-R or CD-RW disc, make sure the disc has been finalized. If it still doesn't play, the recording conditions might be poor, or the disc quality might be lacking; try using a properly recorded disc.
Why is there no sound from my Denon DCD-F109?
If your Denon CD Player's power indicator is on but there's no sound, check that the amplifier is set to the correct function (input). Also, verify that the volume isn't set too low and adjust it accordingly.
Why can't my Denon DCD-F109 CD Player play MP3 or WMA files?
If your Denon CD Player isn't playing MP3 or WMA files, it might be a copyright-protected WMA file or a file that cannot be played normally. Try pressing the 8 or 9 button to select a different file.
Why is my Denon CD Player remote not working?
If your Denon CD Player isn't responding to the remote, several factors could be at play. First, ensure the system cable between the DCD-F109 and DRA-F109 is securely connected. Then, check the batteries in the remote and replace them if they're worn. Make sure you're within 7 meters and at a 30° angle from the DRA-F109, without any obstructions blocking the signal. Also, verify that the batteries are correctly inserted according to the polarity marks. Finally, strong light sources can interfere with the remote sensor; move the unit away from direct sunlight or bright lights.
What to do if playback doesn't start on my Denon DCD-F109?
If your Denon CD Player doesn't start playback when pressing the 1/3 button, the disc might be dirty or scratched; try wiping it clean or replacing it. Also, make sure that the playback media mode is set to “DISC”. Finally, check that the input source on DRA-F109 is set to “CD/USB”.
Why does my Denon CD Player show “00Tr 00:00” with USB?
If your Denon CD Player displays “00Tr 00:00” when a USB device is connected, first check the connection. Ensure the USB device conforms to mass storage class or MTP standards. Note that DENON does not guarantee all USB devices will operate. Also, connect the USB device directly to the USB port, avoiding USB hubs.
What does “00Tr 00:00” mean on my Denon DCD-F109 CD Player?
If your Denon CD Player displays “00Tr 00:00” even after loading a disc, it means there is an unusable disc loaded. Ensure you load an audio CD or a CD-R/-RW disc on which MP3/WMA files are recorded.
Why is a section of my CD skipping on my Denon DCD-F109 CD Player?
If a specific section of a disc isn't playing correctly on your Denon CD Player, the disc might be dirty or scratched. Wipe the dirt off or replace the disc.
General| Audio formats supported | MP3, WMA |
|---|---|
| CD-RW playback | Yes |
| CD changer | No |
| Device type | HiFi CD player |
| Product color | Black |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Depth | 264 mm |
|---|---|
| Width | 250 mm |
| Height | 82 mm |
| Weight | 2800 g |
To Next Page
