What to do if Denon DCM-390 CD Player disc is dirty or scratched?
If your Denon CD Player isn't playing properly, the disc might be dirty or scratched. Try wiping the dirt off the disc or replacing it with a new one.
Why is there no sound from my Denon DCM-390 CD Player? Check amplifier settings?
If you're having trouble with your Denon CD Player's sound output, the amplifier's function settings or adjustments may be incorrect. Check the amplifier’s function and controls and adjust as necessary.
Why Denon DCM-390 remote is not working? Check/replace batteries?
If your Denon CD Player remote isn't working, the batteries may be dead. Replace the batteries with new ones.
What to do if Denon DCM-390 CD Player disc is not properly loaded?
If your Denon CD Player isn't reading the disc, it might not be properly loaded or the loaded disc is not a CD. Reload the disc.
What to do if Denon DCM-390 remote control unit is too far from the set?
If your Denon CD Player remote isn't working, the remote control unit may be too far from the set. Move the remote control unit closer to the set.
What to do if Denon DCM-390 CD Player loaded disc is not a CD?
If your Denon CD Player isn't playing, ensure you've loaded a CD, as the loaded disc may not be a CD.
What to do if Denon DCM-390 CD Player disc has not been finalized?
If your Denon CD Player isn't playing a recorded disc, it might not have been finalized. Finalize the disc then play it.
Why Denon DCM-390 recording conditions are bad or the quality of the disc itself is poor?
If your Denon CD Player is having trouble playing a disc, it could be due to poor recording conditions or the disc quality itself. Use a properly recorded disc.
What to do if Denon CD Player selected file is copyright-protected?
If your Denon CD Player isn't playing a selected file, it might be copyright-protected or unplayable. Use the 8/6 or 7/9 button on the main unit (the 8 or 9 button on the remote control unit) to select a different file.
To Next Page
General
