Denon DCM-560 - Offset and Level Adjustments; Tracking Offset (E;F Balance) Adjustment; HF Level Adjustment

@ DCM-560/460
6. Tracking offset (E/F Balance)
Connection
Oscilloscope
Main Unit
Filter
TP101- @ (TEO) ©
TP101- © (VC)
. Push | 4 OPEN/CLOSE | and load disc holder referrence disk.
. Push | 4 OPEN/CLOSE | and close disc holder.
. Push | ® PLAY] to turn disc. (Displays track number ac)
0.1v/div 1-2 . .
ms/div . Short (+)(-) of oscilloscope and check the base line.
. Confirm that upper and lower amplitude of the waveform is symmetric
against OV.
7. HE level
Connection
Oscilloscope
Main Unit
TP102-@ (HF) ©
TP101- © (VC)
(Oscilloscope) . Push | IFPAUSE}. (Displays track number 03)
. Check HF level of oscilloscope.
50mv/div \7 PYVVOFV
Ak oe q . Confirm that the waveform is in good shape.
ALYY’ (0 pattern in center must be able to discriminate
or
clearly.)
20mVidiv
© Set input mode to
ALTERNATE or
CHOPPER.
Prete eeneany
2
18