Turning off the sound temporarily
1
Press h.
All status display LEDs blink.
0
To cancel, press h again.
Quick Start modes
When set to Quick Start mode, the following two functions are enabled in
standby mode.
o
Bluetooth standby function
The sound bar can be connected to from a Bluetooth device even
when in standby. Connecting turns the sound bar on.
o
HDMI pass through function
HDMI signals received by the sound bar are output to the television,
even when in standby mode.
1
Press and hold TV for 5 seconds or more until the
status display LEDs blink as indicated below.
.
Quick Start
modes
On
Off
(Default)
0
This unit consumes more power when the Quick Start modes is on.
Contents Connections Playback Settings Tips Appendix
27
To Next Page
Loading...
