Denon DHT-S516H Quick Start Guide

DHT-S516H QUICK START GUIDE
STEP 3: CONNECT
OPTIONAL
If you are wall mounting your DHT-S516H you can skip this step.
8 Connect the IR blaster to the "IR OUT" jack on the back of the Soundbar.
I
I 0
8 Peel off the backing and affix the blaster to the Soundbar so that it directly
faces the IR receiver on your 1V.
Note: The location of the IR receiver may be different on your TV. Please consult your TV
manual.
.J
8

Denon DHT-S516H Specifications

General

Internet radio	Yes
Apple docking compatibility	Not supported
Number of tweeter drivers	2
Soundbar speaker RMS power	- W
Woofer diameter (subwoofer)	5.25 \
Image formats supported	BMP, JPG, PNG
Number of amplifier channels	4 channels
Audio decoders	DTS, Dolby Digital, Dolby Digital Plus
Audio output channels	- channels
HDCP version	2.2
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
FM radio	-
Product color	Black
TV stand usage	No
Audio formats supported	AAC, DSD, FLAC, MP3, WAV, WMA
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Subwoofer power consumption	75 W
Cables included	AC, Audio (3.5mm), HDMI, IR, Optical

Weight and Dimensions

Depth	104 mm
Width	1018 mm
Height	73 mm
Soundbar weight	3100 g
Subwoofer depth	311 mm
Subwoofer width	172 mm
Subwoofer height	332 mm
Subwoofer weight	6600 g