Denon DN-2500F Manual

© Press the CD 1 (or CD 2} button while pressing the MEMO CALL button.
e Press the CLEAR button during the 3 seconds that the memory number
(0
to
199)
of
the
recalled
data
is
flashing
m
the
key
section
of
the
display.
(The memory number and the ” {f¥}” turn off from the key and memory
sections of the display.)
The data is now cleared.
NOTE: Even when the data ls cleared, the memory remains called out.
{13} DIRECT SEARCH
The
DN-2500F
is
equipped
with
a
function
for
divectly
accessing
a
specific
position
on
the
disc
of
a
specific
index
number
using
the
number
buttons
and
the
CUE
and
PLAY/PAUSE
buttons
(1) Direct track and time search
e Press the CO 1 (or CO 2} button
("- “ flashes in the track section of the display and the time section turns
off.)
(continued on nex! page}
26
@ Use the number buttons to input the track, minutes, seconds and frame.
(if the input data does not exist on the disc, (he input value flashes on the
display and no other data can be input.)
[9] There is no need to input the minute, second and frame data
® Press the PLAY/PAUSE button.
Playback begins from the specified position
{If the CUE button is pressed, the pickup moves to the specified position }
The direct search mode 1s canceled when the CD | (or CD 2) button is
pressed
When inputting direct search data JELAPSEO} is displayed
Figure 36
(2) Direct index search
Set
the
index
mode.
than
use
the
same
procedure
as
for
direct
rack
and
time
Search
to
directly
access
the
specified
index
num-
ber.
[12] PRESETTINGS
The
DN-2500F
is
equipped
with
a
function
for
storing
various
types
of
preset
data.
This
data
is
not
lost
when
the
power
is
turned
off.
Use
this
function
to
store
in
the
memory
the
desired
settings
for
the
items
described
on
the
table
on
Page
29.
The
presettings
can
be
made
independently
for
CD |
and
CD
2.
Use this
function
to
operate
the
players
with
the
optimum
settings.
(1) Changing the preset data
@ Prass the CD 1 for CD 2) button while pressing the PRESET button
t" P- SEL * appears in tha track and time sections of the display, and
the key section turns off }
NOTE: The preset item can also be changed during disc pisyback.
(continued on next page)
27

Denon DN-2500F Specifications

Power

power supply for US and Canadian models	120 V AC + 10%, 60 Hz
power supply for European models	230 V AC + 10%, 50 Hz
power consumption	27 W

Operating Environment

operational temperature	5 to 36°C
operational humidity	25 to 85% (no condensation)
storage temperature	-20 to 60°C

Audio Specifications

quantization	18-bit linear per channel
sampling frequency	44.1 kHz
total harmonic distortion	0.006%

Weight and Dimensions

player unit dimensions	482 (W) x 88 (H) x 252 (D) mm
control unit dimensions	482 (W) x 132 (H) x 40 (D) mm
player unit weight	6 kg
control unit weight	3 kg