Denon DN-951FA - Page 25

DN-951FA/961FA
3. SPECIFICATIONS TO THE SOFTWARE
3.1 COMMAND LIST
* Applied ASCII code for command
CONTENTS
Reproduction with 1,2,4,8, and 16 times speed skipping
CODE COMMAND NAME __ | PARAMETER
SCAN 1 BYTE, SCAN MODE « (4)
®
= Normal speed (x1)
= 2-times speed (x2)
= 4-times speed (x4)
= 16-times speed (x16)
= FORWARD
= REVERSE
1
0
0
0 = 8-times speed (x8)
0
X
X
BACK CUE Return to playback start position
STAND-BY after searching for designated time (A-TIME)
ae
= MIN x 1 (BCD)
MIN x 10 (BCD)
SEC x 1 (BCD)
SEC x 10 (BCD)
FRAME x 1 (BCD)
FRAME x 10 (BCD)
NONE
1 BYTE, TIME MODE
D END MONITOR
SEND TIME
Reproduction of end of track
Request the TIME of the location of the Pick-up
O)
0 0 0 0 0 0 0 0. =P-TIME (ELAPSE)
= 0 0 0 0 0 0 0 4. =P-TIME (REMAIN)
0 0 0 0 0 0 4 0 =A-TIME (ELAPSE)
0 0 0 0 0 0 4 4. =A-TIME (REMAIN)
Note: Fixed time is not available during the Pick-up moving at searching.
G Contents of the PRE-SET} NONE Request the contents of the PRE-SET |
H ISRC CODE NONE Request the ISRC CODE
(International Standard Recording Code)
INDEX SEARCH 1 BYTE, INDEX NO.
STAND-BY after searching for designated INDEX within
TRACK.
INDEX NO. x 1 (BCD)
INDEX NO. x 10 (BCD)
25