Denon DN-951FA - Page 26

@ DN-95 1FA/961FA
CODE COMMAND NAME | PARAMETER CONTENTS
JUMP | 1 BYTE, JUMP MODE Go up or down either TRACK or INDEX
@
NUMBER (BINARY)
= INDEX
1 = TRACK
0 = FORWARD
1 = REVERSE
CUEING
@
1 BYTE, FRAMES Moved playback point according to Frames designated by
Parameter and repeating Audio signal for approx. 0.1 ~ 0.3 sec.
FRAMES (BINARY)
0 = FORWARD
1 = REVERSE
MODE SET 1 BYTE, SYS MODE Setting all kinds of MODE on the DN-951FA/961FA
*
xo
® [07 [06 | 0s | ps | bs | 02 | ot | 00 | When cancelled
0
Xx 0 0 0 0 0 1. =SINGLE/ (CONTINUE)
xXx 0 0 0 0 1 1. =REMAIN/ (ELAPSE)
* XxX 0 0 0 0 4 0 4. =TRACK MODE
M * xX 0 0 0 0 4 + 0 SINDEX MODE
xX 0 0 0 4 0 0 0 =S,REM MULTI (ID) MODE
0 XxX xX xX xX xX XX SCANCEL
1 xX xX xX X xX =X XxX #SET
Note: = When set the TRACK or INDEX mode, no cancellation of former set mode required and change the mode using with
DIRECT SET (D7=1).
xx Set this mode when using with ID (PLAYER NO.).
OPTION 1 BYTE, OPTION NO.
@® [07 | 06 | 05 | ba | 0 | 02 | 1 | 00 |
Request the system information
[0] 0 0 0 0 0 0 0 0 = TOC data of disc
{1] 0 0 0 0 0 0 0 1 = Beginning of a track (A-TIME)
[2] 0 0 0 0 0 0 1 0 = End of a track (A-TIME)
2 [3] 0 0 ¢) 0 0 0 1 1 = Cue-up of a track (A-TIME)
[4] 0 0 0 0 0 1 0 1 = Contents of the system mode
(5} 0 0 0 0 1 0 0 1 = Version number of CPU on the
DN-951FA/961 FA
(6] 4 xX x = TOC data of a designated track
Se eI IR ea NO. (BINARY)
Start playback
TRACK SEARCH
[07 [ps | os | p4 | bs | 02 | ot | bo |
eae a eee
Poses TRACK NO. x 1 (BCD)
TRACK NO. x 10 (BCD)
1 BYTE, TRACK NO. STAND-BY after search and cue-up for a designated track
26