Denon DN-C635 - 2.6.6 REQUEST MACHINE ID command

Revision1.0 DN-C635 Serial Interface Specification
Date 2003-01-28 17 page of 39
2.6.6 REQUEST MACHINE ID command
This command requests the machine ID.
1) Command format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Command code (‘6’)
2 Reserve ( 0x00 )
3 Reserve ( 0x00 )
4 Reserve ( 0x00 )
5 Reserve ( 0x00 )
6 ETX( 0x03 )
7 BCCH( high-level )
8 BCCL( low-level )
Table 33. Request Machine ID command
2) Answer format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Reply code (‘6’)
2 Answer code (Table 3)
3-15 Machine ID
‘ DENON DN-C635 ‘
16 ETX( 0x03 )
17 BCCH( high-level )
18 BCCL( low-level )
Table 34. Request Machine ID answer
3) Special conditions
None.