Denon DN-C635 - 2.6.12 STOP command

Revision1.0 DN-C635 Serial Interface Specification
Date 2003-01-28 25 page of 39
2.6.12 STOP command
This command stops playback.
1) Command format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Command code (‘A’)
2 Mechanism select ( CD : ‘0’)
3 Reserve ( 0x00 )
4 Reserve ( 0x00 )
5 Reserve ( 0x00 )
6 ETX( 0x03 )
7 BCCH( high-level )
8 BCCL( low-level )
Table 51. STOP command
2) Answer format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Reply code (‘A’)
2 Answer code (Table 3)
3 ETX( 0x03 )
4 BCCH( high-level )
5 BCCL( low-level )
Table 52.STOP answer
3) Special conditions