Denon DN-D9000 - Front Panel Diagram and Controls; Control Layout Overview

3
DN-D9000
Drive Unit
2. Top Cover
1) Remove 4 screws
2
and 2 screws
3
.
2) Detach Top Cover.
2
4
3. Front Panel Unit
1) Remove 7 screws
4
and pull out Front Panel Unit.
Top Cover
1
1
2
Front Panel Unit
Main Unit
1. Drive Unit
1) Remove 4 screws
1
and pull out Drive Unit.
2) Disconnect Flat cable and Connector.
3) Detach Drive Unit.
Note:
• Pull at a straight angle to avoid Flat Cable damage.
• Do not fail to pull AC cord from wall outlet before disconnect
the Flat Cable and Connector. If AC cord is remained
plugged into wall outlet, power is kept supplied in the unit,
which may cause danger.
DISASSEMBLY
(Follow the procedure below in reverse order when reassembling)
Drive Unit
Flat Cable
Connector
3
3
4
4
4