14
DN-HS5500
3
HS5500 SW CHK
mode
・Turn the PARAMETERS knob to select
"HS5500 SW CHK" from the service mode's
top menu, then press the PARAMETERS knob
to set "HS5500 SW CHK" mode.
"HS5500 SW CHK" mode screen appears.
・When the PARAMETERS knob is pressed
while the "HS5500 SW CHK" mode is being
executed, the service mode's top menu reap-
pears.
・When buttons on HS5500 are pressed, the
checkbox of the corresponding button is high-
lighted.
If the checkbox is not highlighted, there is a
problem with that button.
・Once all the buttons have been checked, the
results of checking are displayed.
・Press the PARAMETERS knob to return to the
top screen in the service mode.
No Mode Operation and Function Display
SW CHK OK!
3
HS5500SWCHK
モード
・PARAMETERS ノブを回して、サービスモード
の TOP 画面かHS5500SWCHK を選択し、
PARAMETERS ノブを押して確定します。
HS5500SWCHK モードの画面となります。
・HS5500SWCHK モード中に PARAMETERS ノ
ブを押すと、サービスモードの TOP 画面に戻
ります。
・各ボタンを押すと、該当するボタンのチェッ
クボックスが反転表示されます。
反転表示しないときは、そのボタンに異常が
あります。
・全ボタンのチェックが終了すると、チェック
結果を表示します。
・PARAMETERS ノブを押すと、サービス画面の
TOP 画面に戻ります。
No モード 操 作 と 機 能 表 示
SW CHK OK!