Connecting a PC or Mac
By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used
as a D/A converter. (v p. 48)
NOTE
0
Before USB connecting this unit to your computer, install the driver software in your computer. (v p. 48)
0
Download the driver software from the DNP-2000NE page of the Denon website.
0
Use a cable that is 3 m or less to connect to the computer.
USB 2.0 cable
(not supplied)
Ty p e B
Computer on which the driver software and
audio player software are installed
Contents Connections Playback Settings Tips Appendix
25
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
