Playing digital input
HDMI ARC
COAXIAL
USB-DAC
OPTICAL
Connecting and playing back from a TV
or digital device (HDMI ARC/Coaxial/
Optical 1/Optical 2)
1
Prepare for playback.
Check the connection, then turn on this units. (“Connecting a
TV” (v p. 19), “Connecting to a device with digital audio output
connectors” (v p. 24))
2
Press HDMI ARC, COAXIAL or OPTICAL to switch the
input source to “HDMI ARC”, “Coaxial”, “Optical 1” or
“Optical 2”.
3
Play the component connected to this unit.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
Contents
Connections Playback Settings Tips Appendix
46
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
