Setting the remote control operation
mode to network audio player
operation mode
1
Press and hold the ENTER and number 2 button on the
remote control unit down together for more than 5
seconds.
Setting the remote control operation
mode to amplifier operation mode
1
Press and hold the ENTER and number 1 button on the
remote control unit down together for more than 5
seconds.
0
The remote control operation modes returns to the default settings when the
batteries are removed. Set the remote control operation modes again after
replacing the batteries.
Contents Connections Playback Settings Tips Appendix
83
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
