Need help?Do you have a question about the Denon DR-M44HX and is the answer not in the manual?
Identification and operational description of front panel controls, switches, and buttons.
Details on unit indicators, input/output jacks, and level adjustment controls.
Explanation of how to use the playback, record, and other tape transport functions.
Illustrates the overall signal path and major circuit blocks within the deck.
Shows signal levels throughout the playback and recording signal paths.
Describes the role of the microcomputer in controlling deck mechanisms.
Explains the automatic tape tuning system for optimal performance.
Steps for removing the front panel, escutcheon, and main mechanism unit.
Procedures for detaching printed circuit boards and specific units.
Guide for removing the power supply and HX PRO circuit boards.
Procedures for replacing pinch rollers and aligning the record/playback head.
Steps for replacing the erasing head and adjusting tape guide height.
Guide for checking capstan shaft thrust play and tape transport torques.
Procedures for checking FF/REW torques and back tension during playback.
Verifying input signal sensitivity and proper Dolby NR circuit operation.
Steps for adjusting playback levels and optimizing recording frequency response.
Procedures for adjusting CTS amplifier gain and other electrical calibration tasks.
Component listing for the KU-5610/5611 Audio Amplifier units.
Visual breakdown of cabinet and mechanism parts for DR-M33HX and DR-M44HX.
Essential diagrams for troubleshooting and understanding circuit functions.
Layouts for various PWB units, aiding component identification.
Identification and operational description of front panel controls, switches, and buttons.
Details on unit indicators, input/output jacks, and level adjustment controls.
Explanation of how to use the playback, record, and other tape transport functions.
Illustrates the overall signal path and major circuit blocks within the deck.
Shows signal levels throughout the playback and recording signal paths.
Describes the role of the microcomputer in controlling deck mechanisms.
Explains the automatic tape tuning system for optimal performance.
Steps for removing the front panel, escutcheon, and main mechanism unit.
Procedures for detaching printed circuit boards and specific units.
Guide for removing the power supply and HX PRO circuit boards.
Procedures for replacing pinch rollers and aligning the record/playback head.
Steps for replacing the erasing head and adjusting tape guide height.
Guide for checking capstan shaft thrust play and tape transport torques.
Procedures for checking FF/REW torques and back tension during playback.
Verifying input signal sensitivity and proper Dolby NR circuit operation.
Steps for adjusting playback levels and optimizing recording frequency response.
Procedures for adjusting CTS amplifier gain and other electrical calibration tasks.
Component listing for the KU-5610/5611 Audio Amplifier units.
Visual breakdown of cabinet and mechanism parts for DR-M33HX and DR-M44HX.
Essential diagrams for troubleshooting and understanding circuit functions.
Layouts for various PWB units, aiding component identification.
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Motor | DC servo motor |
| Tape Type | Normal, Chrome, Metal |
| Noise Reduction | Dolby B, C |
| Frequency Response | 20Hz - 20kHz (Metal tape) |
| Inputs | Line input |
| Outputs | Headphones |
| Heads | 3 (1 x record, 1 x playback, 1 x erase) |
To Next Page
