Need help?Do you have a question about the Denon DR-M11 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Type | Cassette Deck |
| Heads | 1 x record/playback, 1 x erase |
| Tape Type | Type I, CrO2, Metal |
| Frequency Response | 30Hz to 16kHz (Metal tape) |
| Wow and Flutter | 0.05% (WRMS) |
| Power Supply | AC 220-240 V, 50/60 Hz |
| Inputs | Line input |
| Outputs | Line Output |
Guidance on setting up the audio set, including power source, placement, and ventilation requirements.
Instructions on proper operation, including avoiding water, lightning, and accidental drops for safe use.
Information regarding servicing, emphasizing professional help and avoiding user-serviceable parts.
Details on connecting the cassette deck to an amplifier using appropriate plugs for left and right channels.
Instructions for plugging headphones into the PHONES jack for private listening or monitoring.
Guidance on connecting to another tape deck for dubbing, referencing amplifier manuals.
Advice on placement to avoid interference and noise from other audio components.
Advice on handling, storing, and preventing accidental erasure of cassette tapes.
Explanation of the automatic tape type detection and adjustment feature based on cassette housing holes.
Details on resetting the counter, indicating index position, and its behavior when power is off.
How to use the MEMORY STOP function to locate a specific point on the tape during operations.
Explanation of tape position indicators, PAUSE/MUTE indicator, and two-color lettering.
Provides maximum recording level guidelines for Normal, CrO2, and Metal tapes using FL Peak Meters.
Explains how to adjust input levels for identical meter readings between left and right channels.
Step-by-step guide for setting up timer-controlled recording with an audio timer and the cassette deck.
Steps for setting up timer-controlled playback using an audio timer and the cassette deck.
Instructions for removing the cassette compartment cover for access to internal components.
Instructions for cleaning heads using cotton swabs moistened with cleaning solution.
Guidance on cleaning the pinchroller and capstan to ensure stable tape transport.
Procedure for demagnetizing the heads to prevent noise and loss of high frequencies.
To Next Page
