To Next PageTo Next Page
Need help?Do you have a question about the Denon DRA-625R and is the answer not in the manual?
General| Total Harmonic Distortion | 0.08% |
|---|---|
| Tuning range | FM, MW |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 150mV (line) |
| Signal-to-Noise Ratio | 86dB (MM) |
Physical controls for power, audio adjustment, and input/output selection.
Buttons for selecting bands, inputs, tuning modes, and FM modes.
Controls for tape selection, manual/auto tuning, presets, and memory.
Indicators for FM mode, tuning status, shift mode, and signal strength.
Displays for selected input, memory status, preset channel, and frequency.
Connections for FM, AM antennas, and grounding terminal.
Input/output terminals for tape decks, phono, CD, AUX/VIDEO, and remote control.
Pre-out, speaker outputs, AC power input, and AM loop antenna connection.
Guidance on installing FM antennas (T-type, coaxial) for optimal reception.
Setup for AM loop/outdoor antennas and proper grounding procedures.
Visual guide for connecting FM and AM antennas.
Wiring diagrams for connecting audio sources, speakers, and tape decks.
Instructions for correctly connecting speaker wires to terminals.
Step-by-step guide to tune and store stations using buttons and memory.
Information on memory backup, battery life, and storage duration for presets.
Guidelines for effective remote control operation, including placement and environmental factors.
Overview of the RC-111 remote's ability to control multiple DENON components.
Detailed functions of buttons on the remote control unit for receiver and deck operations.
Solutions for problems like no reception or noisy signals.
Solutions for issues like no sound, hum, howling, or cracking noise.
Technical performance data for the amplifier section.
Technical performance data for the FM and AM tuner sections.
General electrical, physical, and remote control system specifications.
Contact information for international service centers for consultation and repair.
