Denon DVD-1730 Manual

DVD-1730
BEFORE APPLYING THE UPDATE PLEASE
ENSURE YOU HAVE READ AND FULLY
UNDERSTAND THESE INSTRUCTIONS.
Reproduction, publication in electronic or any other form of
this software and this documentation without the express
written consent of the rightful owner is forbidden and will be
prosecuted by law.
© 2007 DENON UK
Warning:
Please read though these instructions completely before attempting to
update your player. The use of this update is completely at the owner’s
risk. DENON can not be held accountable for damage resulting to the
player or associated equipment as a result of improper use of this
update.
During the upgrade process it is imperative that you do not switch off
the unit's power and/or press any of the buttons on the unit or remote
control unless otherwise instructed.

Denon DVD-1730 Specifications

Video Outputs

composite video output	1.0 Vp-p (with 75 ohms load)
S-Video output - Y	1.0 Vp-p (with 75 ohms load)
S-Video output - C	0.286 Vp-p
component video output - Y	1.0 Vp-p (with 75 ohms load)
component video output - Pb/Cb	0.648 Vp-p (with 75 ohms load)
component video output - Pr/Cr	0.648 Vp-p (with 75 ohms load)

Audio Outputs

frequency response	4 Hz - 20 kHz
signal-to-noise ratio	115 dB
dynamic range	98 dB
total harmonic distortion	0.004%

General Specifications

power supply	AC 120 V, 60 Hz
power consumption	12 W (Standby: 0.95 W)
dimensions	435 (W) x 75 (H) x 310 (D) mm
weight	2.3 kg