Do you have a question about the Denon DVD-1940 and is the answer not in the manual?
composite video output | 1.0 Vp-p (with 75 ohms load) |
---|---|
s-video output Y | 1.0 Vp-p (with 75 ohms load) |
s-video output C | 0.3 Vp-p |
component video output Y | 1.0 Vp-p (with 75 ohms load) |
component video output Pb/Cb | 0.7 Vp-p (with 75 ohms load) |
component video output Pr/Cr | 0.7 Vp-p (with 75 ohms load) |
hdmi output | 1 HDMI Output |
analog output | 1 Set of Analog Output (L/R) |
---|---|
multi channel output | 1 Set (Front L/R, Centre, Surround L/R, Subwoofer) |
optical digital output | 1 Optical Digital Output |
coaxial digital output | 1 Coaxial Digital Output |
hdmi output | 1 HDMI output |
frequency response DVD | 4 Hz - 22 kHz (48kHz sampling) |
---|---|
frequency response DVD high | 4 Hz - 44 kHz (96kHz sampling) |
frequency response DVD very high | 4 Hz - 88 kHz (192kHz sampling) |
frequency response CD | 4 Hz - 20 kHz |
frequency response super audio CD | 4 Hz - 100 kHz |
signal-to-noise ratio | 115 dB |
dynamic range DVD | 100 dB |
dynamic range CD | 98 dB |
total harmonic distortion CD | 0.004% at 1 kHz |
power supply | AC 230 V, 50 Hz |
---|---|
power consumption | 15 W |
standby power consumption | 0.4 W |
dimensions | 435 x 75 x 310 mm |
---|---|
weight | 2.6 kg |
Enables digital transfer of high-definition video and audio via a single cable.
Details all available ports for audio and video output on the rear panel.
Guides for connecting to analog stereo or surround sound audio systems.
Instructions for connecting to TVs via SCART, S-Video, and Component video.
Specifics for high-definition connections, including output modes and copyright.
Solutions for common problems like no sound, distorted picture, or no audio output.
Fixes for freezing, disc read errors, and HDMI connection issues.