19
The simple connection of one IEEE 1394 cable permits high quality digital transfer of the following between devices having IEEE 1394
connectors: the audio of DVD video, DVD audio that up until now could only be connected by 5-conductor audio cable in an analog
connection, or Super Audio CD and other multi-channel audio. (unless DENON LINK connections)
(IEEE 1394 is an international standard established by the Institute of Electrical and Electronics Engineers, Inc. of the U.S.)
(9) IEEE 1394 connections
DVD-A1XV
AV amplifier with IEEE 1394 terminals
To power outlet
2 IEEE1394 settings:
• For IEEE1394 connection, set “IEEE1394” under ”DIGITAL INTERFACE SETUP”at “SETUP” to ”ON”. (See pages 38 ~ 42.)
✽ The DVD-A1XV’s IEEE 1394 mode is designed based on IEEE Std. 1394a-2000, Standard for a High Performance Serial Bus.
✽ IEEE 1394 network
The following types of connections can be made between devices handling IEEE 1394 audio signals (A&M protocol):
q Daisy chain connections
Connect the sets in series using a single IEEE 1394 cord. Up to 15 sets can be connected.
w Tree (tower) connections
Connect the sets in parallel and in series using a single IEEE 1394 cord. Up to 63 sets can be connected.
Copyright Protection System
To play back through an IEEE 1394 connection the audio of Super Audio CD or DVD (except for discs that may be copied freely),
both the player and the amplifier are required to support a copyright protection system called DTCP (Digital Transmission Content
Protection). DTCP is copy protection technology comprising data encryption and the authentication of the remote device. This unit
supports DTCP. Please see the operation manual of your amplifier for information about your amplifier.
IEEE 1394
To Next Page
Loading...
Need help?
General
