Denon Exercise Freak AH-W150 User Manual

4
Preparation for Use
Turning Bluetooth Wireless Connectivity
On
Turn the Bluetooth function on in advance for the Bluetooth
device which is to be connected.
Press and hold the headphones’
Control button for approx. 1
second.
tA beeping sound will be emitted
and the red and blue LED indicators
will light up simultaneously for
approx. 1 second.
tThe power switches on, and the
Bluetooth function switches on.
tBluetooth is automatically
connected if the headphones and
Bluetooth device have already been
paired (
vpage 3 “Pairing with
a Bluetooth device”).
n Turning Bluetooth Wireless Connectivity Off
Press and hold the Control button for approx. 5 seconds and longer.
tA beeping sound will be emitted and the red and blue LED
indicators will light up simultaneously for approx. 1 second.
tThe power then switches to a standby status, and the Bluetooth
function switches off.
Even when in a power standby status, the headphones still consume
a small amount of power.
NOTE
If the LED indicators don’t light up when you press the Control button,
the battery has been depleted. Please recharge the battery.
Adjusting the fit of the headphones
Adjust the slider length to fit your head when wearing the headphones.
NOTE
tPlease read the attached “Precautions on the use of headphones”
documentation.
tAvoid getting your fingers or other body parts caught in the product’s
moving portions.
tDo not pull forcefully on the sliders.

Denon Exercise Freak AH-W150 Specifications

General

Brand	Denon
Model	Exercise Freak AH-W150
Category	Headphone
Language	English