1. Factory Initialization Mode
1.1. Actions
Various user settings are cleared and the software is restored to the factory version.
1.2. Operations
(1) Remove the AC plug.
(2) Insert the AC plug while pressing "Bluetooth" button, and wait for more than 5 seconds.
(3) Check that the Status LED is now blinking in orange and then release the button.
(4) The Status LED blinks in orange while this unit is initializing.
(5) This unit automatically restarts when initialization is complete.
1.3. Initialization item
No Items Default
1 My Devices name Cleared
2 Network information Cleared
3 EQ and various user settings Cleared
4 Firmware Factory setting
2. User Initialization Mode
2.1. Actions
Various user settings are cleared.
2.2. Operations
(1) While the power is On, hold down buttons "Bluetooth" and "Connect" for at least 5 seconds.
(2) Check that the Status LED is now blinking in orange and then release the button.
(3) The Status LED blinks in orange while this unit is initializing.
(4) This unit automatically restarts when initialization is complete.
2.3. Initialization item
No Items Default
1 My Devices name Cleared
2 Network information Cleared
3 EQ and various user settings Cleared
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
50
To Next Page
Loading...
